| Nominal Size: | DN15-DN50 |
| Face to Face: | Manufacturer’s Standard |
| Flange Drilling: | ANSI B2.1 NPT, AS1722.1 Part1 BSPP |
| Pressure: | Up to 16 Bar (Elastomer Diaphragm)* Up to 10 Bar (PTFE Diaphragm)* *Max pressure varies across size range |
Material of Construction
Diaphragm Materials
10 – Natural rubber (NR)
20 – EPDM rubber
30 – Butyl rubber (IIR)
40 – Nitrile rubber (NBR)
50 – Neoprene rubber (CR)
60 – Hypalon rubber (CSM)
70 – Viton rubber (FKM/FPM)
92 – PTFE/EPDM backed
93 – PTFE/Butyl backed
96 – PTFE/Hypalon backed
97 – PTFE/Viton backed
98 – PTFE/Silicon backed
9D – TFM/PVDF/EPDM (3 PIECE)
9R – TFM/PVDF/EPDM (3 PIECE
with titanium Connector)
NB: Vacuum grade diaphragms available on request
Design Standards
EN13397-2001 (BS5156:1985)
MSS SP88-1993-(R-01)
Testing Standards
EN12266-1 2002(BS6755 Part 1)
MSS SP88-1993-(R-01)
Brochures
WT Range Brochure
1.92 MB
Actuation Brochure
1.45 MB
WT Diaphragms Brochure
561.62 KBData Sheet
Screwed Steel
DN15-DN80 Rising Handwheel
327.07 KB DN15-DN80 Non Rising Handwheel
281.67 KBInstallation and Operation Manual
