| Nominal Size: | DN15-DN200 |
| Face to Face: | BS, DIN, MSS |
| Flange Drilling: | ANSI#125/150, PN10/16, Table D/E, JIS |
| Pressure: |
Up to 16 Bar (Elastomer Diaphragm)* Up to 10 Bar (PTFE Diaphragm)* *Max pressure varies across size range |
Material of Construction
Diaphragm Materials
10 – Natural rubber (NR)
20 – EPDM rubber
30 – Butyl rubber (IIR)
40 – Nitrile rubber (NBR)
50 – Neoprene rubber (CR)
60 – Hypalon rubber (CSM)
70 – Viton rubber (FKM/FPM)
92 – PTFE/EPDM backed
93 – PTFE/Butyl backed
96 – PTFE/Hypalon backed
97 – PTFE/Viton backed
98 – PTFE/Silicon backed
9D – TFM/PVDF/EPDM (3 PIECE)
9R – TFM/PVDF/EPDM (3 PIECE
with titanium Connector)
NB: Vacuum grade diaphragms available on request
Design Standards
EN13397-2001 (BS5156:1985)
MSS SP88-1993-(R-01)
Testing Standards
EN12266-1 2002(BS6755 Part 1)
MSS SP88-1993-(R-01)
Brochures
WT Range Brochure
1.92 MB
Actuation Brochure
1.45 MB
WT Diaphragms Brochure
561.62 KBData Sheet
MSS SP88-1993-(R-01) – Raised Face
DN25-DN150 Rising Handwheel
346.73 KB DN25-DN150 Non Rising Handwheel
265.90 KBEN558-1 Series 1(DIN3202-F1) – Raised Face
DN15-DN150 Rising Handwheel
348.09 KB DN25-DN150 Non Rising Handwheel
265.97 KBEN558-1 Series 1(DIN3202-F1) – Full Face
DN15-DN150 Rising Handwheel
358.43 KB DN25-DN150 Non Rising Handwheel
286.90 KBEN558-1 Series 7(BS5156) – Raised Face
DN15-DN150 Rising Handwheel
348.33 KB DN25-DN150 Non Rising Handwheel
267.23 KB DN200 Non Rising Handwheel
267.40 KBEN558-1 Series 7(BS5156) – Full Face
DN15-DN150 Rising Handwheel
621.29 KB DN25-DN150 Non Rising Handwheel
287.28 KBInstallation and Operation Manual
