| Nominal Size: | DN15-DN300 |
| Face to Face: | BS, DIN, MSS |
| Flange Drilling: | ANSI#125/150, PN10/16, Table D/E, JIS |
| Pressure: | Up to 10 Bar *Max pressure varies across size range |
Material of Construction
Diaphragm Materials
10 – Natural rubber (NR)
20 – EPDM rubber
30 – Butyl rubber (IIR)
40 – Nitrile rubber (NBR)
50 – Neoprene rubber (CR)
60 – Hypalon rubber (CSM)
70 – Viton rubber (FKM/FPM)
92 – PTFE/EPDM backed
93 – PTFE/Butyl backed
96 – PTFE/Hypalon backed
97 – PTFE/Viton backed
98 – PTFE/Silicon backed
9D – TFM/PVDF/EPDM (3 PIECE)
9R – TFM/PVDF/EPDM (3 PIECE
with titanium Connector)
NB: Vacuum grade diaphragms available on request
Design Standards
EN13397-2001 (BS5156:1985)
MSS SP88-1993-(R-01)
Testing Standards
EN12266-1 2002(BS6755 Part 1)
MSS SP88-1993-(R-01)
Brochures
ST Range Brochure
1.94 MB
Actuation Brochure
1.45 MB
ST Diaphragms Brochure
707.23 KBData Sheet
MSS SP88-1993-(R-01)
DN25-DN200 Rising Handwheel
287.68 KB DN25-DN200 Non Rising Handwheel
263.71 KB DN250-DN300 Non Rising Handwheel
232.58 KBEN558-1 Series 1(DIN3202-F1)
DN25-DN200 Rising Handwheel
288.42 KB DN15-DN20 Non Rising Handwheel
263.75 KB DN25-DN200 Non Rising Handwheel
263.97 KB DN250-DN350 Non Rising Handwheel
240.50 KBEN558-1 Series 7(BS5156)
DN25-DN200 Rising Handwheel
288.57 KB DN15-DN20 Non Rising Handwheel
263.89 KB DN25-DN200 Non Rising Handwheel
264.16 KB DN250-DN350 Non Rising Handwheel
233.27 KBInstallation and Operation Manual
